INTRO

In fact, there are 22 different products in the Geekvape Aegis series. The Geekvape Aegis Eteno pod mod, also known as the Geekvape E100, is another recent model that they appear to be bringing to this range on a regular basis.
The E100 already has a pre-installed 0.2-ohm coil that can handle 60 to 70 watts. A 0.4-ohm coil for the 50–60 watt range is also included, although the device can operate at 100 watts when powered by an external 18650 lithium-ion battery. The package also includes a pod that can carry an incredible 4.5mL of whatever e-juice you select. The Geekvape E100 is a lightweight pod mod with a stylish appearance and cosy cushioning on the main body and where your hand’s rest.

 

SPECIFICATIONS

Parameters

• Dimension： 39.56*33.00*134.50mm
• Output Mode: SMART / POWER / BOOSTING / VPC / TC-NI / TC-TI / TC-SS / TC-TCR
• Output Power: 5W~100W
• Maximum Output Current: 35A
• Maximum Output Voltage: 7.5V
• Charging Port: Type-C Port
• Resistance Range of Cartridge: 0.1 ohm – 3 ohm
• Battery Specification: Built-in 3000mAh (Geekvape E100i)
• Battery Specification: External Single 18650 (Geekvape E100)
• Display Screen: 1.06 inch, TFT colour screen
• Operating Temperature: 0℃～45℃
• Storage Temperature: -20℃～60℃
• Relative Humidity: 45%RH～75%RH
• Cooling Mode: Natural cooling

 

Features

• Brand New ID
• Top Airflow Leakproof
• Pod with High Compatibility
• IP68 Rating
• AS-CHIP 3.0
• 100W Max Output
• External Single 18650

 

Colours

• Blue
• Beige
• Red
• Black
• Rainbow
• Volcanic Grey
• Galaxy Grey

 

DESIGN & APPEARANCE

Without being excessively manly, the Geekvape E100 design is svelte and contemporary. The device’s body is covered with a plush layer of silicone to prevent it from seeming overly sterile and mechanical. There is faux leather padding on the rear of the vaporizer, which is typical of this kind of pod mod. Beautiful needlework that will last for a very long time. The device’s side is covered in the Geekvape logo. In addition, there is a slider on the left side that serves as a locking mechanism, as we have frequently seen in other high-powered Geekvape Aegis products.
The top of the Aegis Eteno’s front panel houses a sizable activation button. A 1.06-inch screen that shows the mode, battery, wattage, ohms, voltage, and puff count is directly underneath it. The wattage adjustment controls, navigation buttons, and the Type-C charging connector are all located below the screen. The screen has a lovely design and presents all the essential details in an easy-to-read layout.

 

BATTERY & CHARGING

The Geekvape E100 pod mod comes without an internal battery. To begin, you must first attach a 18650 battery. Each battery typically costs between $3 and $10, so you should always keep two on hand. A high-rate battery with a discharge current of at least 30A is advised by Geekvape.
The Geekvape E100 screen, unfortunately, does not provide a precise charge percentage. It utilises a traditional battery bar, so when it gets red, it’s time to charge. The battery bar fills up constantly when charging.

 

DURABILITY

The Geekvape E100’s design is suitable for withstanding the ups and downs of your daily life. Soft silicone covers the body of the gadget, preventing harmful scratches and protecting it from drops. Additionally, with the majority of mouthpiece falls, the glass pod shouldn’t sustain a direct blow.
The gadget has an IP68 classification, which means it guards against sand and dust penetration and can be immersed in 1.5 metres of water for 30 minutes. If you buy it, it needs to be durable enough to withstand everyday misuse.

 

PERFORMANCE

Regardless of your demands or tastes, the E100 from Geekvape delivers a superb vaping experience. You can adjust the performance of the pod mod to suit your preferences for vaping thanks to its eight settings. Or you may choose the simple route—Smart Mode. Whatever you decide, the hits are throaty and warm. The 0.2ohm mesh coil, operating at 60–70 watts, produces powerful hits and enormous vapour clouds. The 0.4ohm coil, designed for 40–50 watts, provides significantly smoother hits with commensurately large clouds. The flavour of your preferred e-juice is intensely delivered with each DTL hit.

 

IP68 TESTING

Regarding the IP68 classification, I did fling the gadget around a lot for fun, and it stands up admirably. I used it more roughly than you would typically use a gadget in daily life. The water test results were the same; there were no problems, indicating that it functions similarly to the rest of the Aegis series. Just keep in mind that the tank is not sturdy, the glass is easily broken, and the water inside will damage the coil. The tank cannot be used until the glass is replaced because there is no spare in the package.

 

 

CONTENTS

1 x Geekvape E100 Mod
1 x Geekvape E100 Pod (4.5ml)
2 x Geekvape P Series Coil (Pre-installed: 0.2Ω, 60-70W Spare coil: 0.4Ω 50-60W)
1 x Spare Parts Pack
1 x USB Cable (Type-C)
1 x Coil Tool

 

VERDICT

A fantastic pod mod gadget is the Geekvape E100. Due to its lightweight and silicone body wrap, the design is a perfect blend of form and function. The pod’s special construction makes it resistant to drops while yet carrying 4.5 mL of e-liquid. The design of the screen is understated yet stylish.
To operate, the Geekvape E100 needs an external 18650 battery. The appliance doesn’t leak and creates dense, heavy clouds that give superb flavour. There are no drawbacks to this item that we found worth mentioning.